Display indicators
The device is being used in a UMTS network
(network service).
The battery charge level. The higher the bar,
the stronger the charge in the battery.
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the
Outbox folder in Messaging.
You have one or more missed phone calls.
The keys of the device are locked.
An alarm is active.
You have activated the Silent profile, and the
device does not ring for an incoming call or
message.
Bluetooth connectivity is activated.
A Bluetooth connection is established. When
the indicator is blinking, your device is trying
to connect with another device.
A GPRS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
An EGPRS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
25
Nok
ia E7
5 - The basi
cs
A UMTS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The
icon may vary between regions. If the icon is
, the connection is active. If the icon is , the
connection is on hold.
You have set the device to scan for wireless
LANs (WLAN), and a WLAN is available.
A WLAN connection is active in a network that
does not have encryption.
A WLAN connection is active in a network that
has encryption.
Your device is connected to a computer with a
USB data cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If
you have two phone lines, a number indicates
the active line.
A headset is connected to the device.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
You have an ongoing push-to-talk connection.
Your push-to-talk connection is in the do not
disturb mode, because the ringing type of your
device is set to
Beep once
or
Silent
, or you
have an incoming or ongoing phone call. In this
mode, you cannot make PTT calls.