Remote configuration
Select
Menu
>
Control panel
>
Phone
>
Device
mgr.
.
With Device manager, you can manage settings, data,
and software on your device remotely.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started
by the server when the device settings need to be
updated.
To create a new server profile, select
Options
>
Server profiles
>
Options
>
New server profile
.
You may receive these settings from your service
provider in a configuration message. If not, define the
following:
•
Server name
— Enter a name for the configuration
server.
•
Server ID
— Enter the unique ID to identify the
configuration server.
•
Server password
— Enter a password to identify
your device to the server.
20
Find hel
p
•
Access point
— Select the access point to use for
the connection, or create a new access point. You
can also choose to be asked for the access point
every time you start a connection. This setting is
available only if you have selected
Internet
as the
bearer type.
•
Host address
— Enter the web address of the
configuration server.
•
Port
— Enter the port number of the server.
•
User name
and
Password
— Enter your user ID and
password for the configuration server.
•
Allow configuration
— Select
Yes
to allow the
server to initiate a configuration session.
•
Auto-accept all requests
— Select
Yes
if you do
not want the server to ask for your confirmation
when it initiates a configuration session.
•
Network authentication
— Select whether to use
http authentication.
•
Network user name
and
Network
password
— Enter your user ID and password for
the http authentication. This setting is available
only if you have selected
Network
authentication
to be used.
To connect to the server and receive configuration
settings for your device, select
Options
>
Start
configuration
.
To view the configuration log of the selected profile,
select
Options
>
View log
.
To update the device software over the air, select
Options
>
Check for updates
. The update does not
erase your settings. When you receive the update
package on your device, follow the instructions on the
display. Your device is restarted once the installation is
complete. Downloading software updates may involve
the transmission of large amounts of data (network
service). Make sure that the device battery has enough
power, or connect the charger before starting the
update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
restarted. Be sure to back up data before accepting
installation of an update.