Pair devices
Select
Menu
>
Control panel
>
Connectivity
>
Bluetooth
.
Open the paired devices tab.
Before pairing, decide on your own passcode (1-16
digits), and agree with the user of the other device to
use the same code. Devices that do not have a user
interface have a fixed passcode. You need the passcode
only when you connect the devices for the first time.
After pairing, it is possible to authorise the connection.
Pairing and authorising the connection makes
connecting quicker and easier, as you do not have to
accept the connection between paired devices every
time you establish a connection.
The passcode for remote SIM access must have 16
digits.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected accessory,
such as a car kit, to make or receive calls.
Your wireless device will not make any calls, except to
the emergency numbers programmed into your device,
while in this mode.
124
Co
nnect
ivi
ty
To make calls, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code
to unlock it first.
1. Select
Options
>
New paired device
. The device
starts to search for Bluetooth devices within range.
If you have sent data using Bluetooth connectivity
before, a list of the previous search results is
displayed. To search for more Bluetooth devices,
select
More devices
.
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select
Yes
to make the connection between your
device and the other device automatic, or
No
to
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to the paired device, select
Options
>
Assign short name
. The nickname is
displayed in your device.
To delete a pairing, select the device whose pairing you
want to delete and
Options
>
Delete
. To delete all
pairings, select
Options
>
Delete all
. If you are
currently connected to a device and cancel the pairing
with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select
Set as authorised
. Connections
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status only for your
own devices, such as your compatible headset or
computer, or devices that belong to someone you trust.
If you want to accept connection requests from the
other device separately every time, select
Set as
unauthorised
.
To use a Bluetooth audio accessory such as a Bluetooth
handsfree or headset, you need to pair your device with
the accessory. For the passcode and further
instructions, see the accessory user guide. To connect
to the audio accessory, switch on the accessory. Some
audio accessories connect automatically to your
device. Otherwise, open the paired devices tab, select
the accessory and
Options
>
Connect to audio
device
.